Complex formation, thermal properties, and in-vitro digestibility of gelatinized potato starch-fatty acid mixtures

Effects of the type and amount of fatty acid (0-2.0 mmol/g-starch of lauric, myristic, palmitic, stearic, oleic, and linoleic acids) on the complex formation, thermal properties, and in-vitro digestibility of gelatinized potato starch-fatty acid mixtures were investigated. Complex index (CI) evaluated by the reduction in the iodine binding capacity of starch increased with an increase in the amount of fatty acids, and reached a plateau depending on the type of fatty acid. The maximum CI value was higher in the order of lauric (49.9%), linoleic (47.6%), myristic (42.4%), oleic (36.7%), stearic (35.3%), and palmitic acid (30.9%). From the calorimetric study, it was demonstrated that melting temperature of the complexes was higher in the order of stearic (96.7 °C) > lauric, myristic, palmitic, and oleic (89.6-92.1 °C) > linoleic acid (78.3 °C). Melting enthalpy for complexes was roughly related to the CI value (R² = 0.667). From the in-vitro digestibility measurement, it was found that a certain amount of fatty acid reduced the starch content hydrolyzed at a given condition. Among them, 0.50 mmol/g-starch lauric and oleic acid samples showed the largest reduction in the hydrolyzed starch content. This result was related to the extent of complex formation characterized by CI value and its helical order characterized by melting temperature. In addition, there was a possibility of the complex formation between amylose and unsaturated fatty acid during the hydrolysis of gelatinized starch.     

Engineering of novel tamavidin 2 muteins with lowered isoelectric points and lowered non-specific binding properties

The avidin-biotin interaction is widely employed as a universal tool in numerous biotechnological applications. In avidin-biotin technology, non-specific binding to biological macromolecules is a hindrance. The major origin of this non-specific binding is the electrical charge of the surface of biotin-binding proteins. Tamavidin 2, a fungal avidin-like protein that binds biotin with an extremely high affinity, can be produced as a soluble recombinant protein in Escherichia coli. The isoelectric point of tamavidin 2 is 7.4-7.5, lower than avidin (10.0), and slightly higher than that of streptavidin (6.0-7.5). Here, we genetically engineered charge mutants of tamavidin 2 to reduce non-specific binding. By substituting an acidic residue (glutamic acid) for basic residues (arginine and lysine), we constructed three mutant proteins (muteins) and confirmed their high-level production in soluble form in E. coli, as well as that of tamavidin 2.?We then tested these proteins for non-specific binding to salmon sperm DNA, glycoproteins (integrin and fibronectin), and IgG from human sera. The muteins showed lower non-specific binding than tamavidin 2 to these macromolecules. In particular, one mutein, tamavidin-R104EK141E, which had the lowest isoelectric point (5.8-6.2) among avidin, streptavidin and tamavidin 2, displayed the lowest non-specific binding. The affinity of this mutein to biotin was high, comparable with that of tamavidin 2. These findings indicate that tamavidin-R104EK141E has the potential to serve as a robust tool in the numerous applications of biotin-binding proteins.     

Design of a photocatalyst for bromate decomposition: surface modification of TiO2 by pseudo-boehmite

The rate of BrO3- reduction by a commercial TiO2 photocatalyst under UV illumination in an aqueous solution was increased by lowering the pH from 7 to 5. The effect is attributable to an enhancement of the electrical interaction between BrO3- and the positively charged surfaces of the TiO2 photocatalyst. The surface charge can be controlled by a surface modification of the TiO2 photocatalyst without controlling the pH of the water. In fact, the isoelectric point of surface-modified TiO2 was higher than that of the unloaded TiO2 photocatalyst, resulting in an increase in the rate of the photocatalytic reduction of BrO3- at a neutral pH. This increase is explained by an increase in the amount of adsorbed BrO3- on the photocatalyst surface.     

Progress in ECRF antenna development for JT-60SA

Structural, mechanical and optical design work on antennas/launchers for the electron cyclotron range of frequency heating and current drive system in JT-60 Super Advanced (JT-60SA) have been advanced based on a linear motion antenna concept. A CAD model of the launcher was built with realistic component sizes. A mock-up of the steering structure consisting of two different bellows sections for poloidal and toroidal beam scanning was fabricated to test movement of the bellows. The poloidal (?40° to +20°) and toroidal (?15° to +15°) injection angle ranges required in JT-60SA were shown to be realized by this steering structure and mirrors.     

A comparative study of the emotional assessment of automotive exterior colors in Asia

This article compares color assessments of automotive exteriors at four locations in China, Thailand and Japan. This study employed painted panels of twelve colors, thirty sensory words and fifteen pairs of emotion variables. It also used reference figures of nine cars that included four styling categories, namely sedans, compacts, sport utility vehicles and sports cars. The results of like-dislike tests revealed that basic automotive exterior colors, such as black, white and red, were highly preferred across locations. However, geographical differences are apparent in the preference for some non-basic colors. To elucidate these geographical differences, a Chi-square test and principal component analysis were performed on the data on emotion variables. The results revealed both similarities and differences in color preferences among the four locations. Color preferences were similar in Hong Kong and Shanghai when simply evaluated by color samples. However, similar preferences for automotive exterior colors were observed in Hong Kong, Kyoto and Bangkok, but not in Shanghai. These results suggest that there is fluctuation in the emotion evoked by a color when the color is considered in the context of automotive exteriors. Therefore, this study indicates that automotive sales can be secured in the global marketplace by creating a single palette of exterior colors based on similar color preferences across countries. However, these results also indicate that preparing market-specific automotive-color line-ups can be an effective marketing strategy.     

Melt-mixing by novel pitched-tip kneading disks in a co-rotating twin-screw extruder

Melt-mixing in twin-screw extruders is a key process in the development of polymer composites. Quantifying the mixing performance of kneading elements based on their internal physical processes is a challenging problem. We discuss melt-mixing by novel kneading elements called “pitched-tip kneading disk (ptKD)”. The disk-stagger angle and tip angle are the main geometric parameters of the ptKDs. We investigated four typical arrangements of the ptKDs, which are forward and backward disk-staggers combined with forward and backward tips. Numerical simulations under a certain feed rate and screw revolution speed were performed, and the mixing process was investigated using Lagrangian statistics. It was found that the four types had different mixing characteristics, and their mixing processes were explained by the coupling effect of drag flow with the disk staggering and pitched-tip and pressure flows, which are controlled by operational conditions. The use of a pitched-tip effectively controls the balance of the pressurization and mixing ability.     

Differences between Human and Mouse IgM Fc Receptor (FcµR)

Both non-immune “natural” and antigen-induced “immune” IgM are important for protection against pathogens and for regulation of immune responses to self-antigens. Since the bona fide IgM Fc receptor (FcµR) was identified in humans by a functional cloning strategy in 2009, the roles of FcµR in these IgM effector functions have begun to be explored. In this short essay, we describe the differences between human and mouse FcµRs in terms of their identification processes, cellular distributions and ligand binding activities with emphasis on our recent findings from the mutational analysis of human FcµR. We have identified at least three sites of human FcµR, i.e., Asn66 in the CDR2, Lys79 to Arg83 in the DE loop and Asn109 in the CDR3, responsible for its constitutive IgM-ligand binding. Results of computational structural modeling analysis are consistent with these mutational data and a model of the ligand binding, Ig-like domain of human FcµR is proposed. Serendipitously, substitution of Glu41 and Met42 in the CDR1 of human FcµR with mouse equivalents Gln and Leu, either single or more prominently in combination, enhances both the receptor expression and IgM binding. These findings would help in the future development of preventive and therapeutic interventions targeting FcµR.     

Engineering ethics education on the basis of continuous education to improve communication ability

This paper proposes an engineering ethics education method for students on the basis of continuous education to improve communication ability. First, through the process of debate, the students acquire the fundamental skills necessary to marshal their arguments, to construct rebuttals, and to summarize debates. Second, the students study the fundamental techniques to make a presentation on technical subjects related to electrical engineering. Following these classes, in lectures on engineering ethics, the students probe the causes of various accidents and consider better approaches for avoiding such accidents with each other. In most cases, the students can express good and commonsensical opinions from an ethical standpoint. However, they can hardly make judgments when the situations, such as the human relations in the above accidents, are set up in concrete terms. During the engineering ethics class, the students come to know that the human relations behind the case make ethical matters more complicated. Furthermore, they come to understand that facilitating daily communications with co‐workers and/or supervisors is very important in order to avoid such accidents. The recognition of the students is primarily the result of the continuous education during 3 years. It can be said that the engineering ethics education thus constructed increases in the students this kind of spontaneous awareness as well as their ethical qualities as engineers. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 183(3): 1–8, 2013; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22283     

On-line measurement of orientation development in the high-speed melt spinning process

On-line measurement of birefringence was performed in the high-speed melt spinning process of poly(ethylene terephthalate) using an apparatus that incorporates a rotating polarizer for the measurement of the optical retardation of running filament. Particular attention was paid to the detailed measurements in the vicinity of neck-like deformation. Through the measurement at the take-up velocity of 5 km/min, development of birefringence under the strain rate up to about 1 ms^?1 was investigated. To analyze the relation between applied stress and birefringence, tension and temperature profiles of the spin-line were calculated based on the experimentally obtained diameter profiles. Even though the strain rate is extremely high, a linear relationship between birefringence and a parameter calculated by dividing stress by temperature was confirmed to hold up to birefringence and stress/temperature values of about 0.017 and 10 kPa/K, respectively.